others  

1. MOULD RELEASE AGENT
Mould release agent helps to aid the release of the moulded rubber products from the mould. There are three types of Mould Release Agents – Semi-permanent type, Silicone-free, Water based semi-permanent.

2. INSIDE TYRE PAINT
This is applied into the inner side of the un-cured tyre to have very good slip of the bladder into the green tyre.

3. OUTSIDE TYRE PAINT
This is the water based dispersion specially designed to have high rubber to rubber adhesion and the combination of fillers/binder aid rubber flow to reduce the splice cracking and to be sprayed onto the outer surface of the un-cured tyre.

4. DRC - DEVULCANISED RUBBER COMPOUND
“De-vulcanise” as the name refers to the process in which the cross-linked bonds in the rubber product cleave (de-crosslink) either totally or partially and can be re-vulcanised & utlilised again like the virgin rubber.

DRC – De-vulcanised Rubber compound mainly refers to the de-linking of the sulphur linkages of the cured Rubber Products through the mechano-chemical process, from the commonly used rubber products such as tyres, extruded, moulded & calendered products